More than likely the msd smart card is hung. With the software off you can press the menu key on the front of the MSD until you see controller , press item , then press yes at restart. Once the controller restarts, try again and you should be ok to collect data. This problem most often happens after a filament blows mid run.
If the above doesn't work, power cycle the msd. I hope that helps.
We are glad this was helpful! We are sorry this was not helpful. If you still need assistance please create a community post or contact support. To help us improve, please provide any additional feedback.
For full details of how we will treat your information, please view our privacy policy.
