In Intuvo 9000 showing split vent restriction test failed.
In Intuvo 9000 showing split vent restriction test failed.
Hi
You can change filter of split vent line then do test again..
Hope, it will pass..
Hi
i changed split vent trap, its failed.
its showing constantly high ~3.7 PSI instead of <2.5PSI
Check inlet consumables and replace it..
Check inlet consumables and replace it..
changed liner ,septa & oring, still same problem
Then i will suggest to contact your local agilent support to check it onsite...May be issue of firmware or flow controller..
okay thank you