What steps are required to zero the septum purge flow on an 8890 SS inlet?
Find maintenance, best practice, and troubleshooting articles.
What steps are required to zero the septum purge flow on an 8890 SS inlet?
It is currently set at 3 ml/min. As the oven heats during a run the flow increases to 5 ml/min and instrument gives a septum purge flow not ready error.
Look like there is some hardware issue..need onsite check..
Meanwhile, put septum purge flow then run n check...
I mean set septum purge flow 1 then run n check...
I mean set septum purge flow 1 then run n check...