8890 GC Sequence locks up openlab.

I have an 8890 GC that is running open LAB C01.10 on the same computer I also run a 6890N. When openLab is loaded it sees the instrument and is receiving data from the instrument . But when you go to open the Sequence it locks up openlab screen. The 6890 runs fine. Thank you for any help.

Parents
  • Hi

    Are you using both instrument with different software in one PC Or using one software to control both instruments as instrument 1 & instrument 2.

    Earlier sequence was working fine in both instrument in same time?

  • I am using one software to control both instruments as instrument 1 & instrument 2 with 2 licenses.  1 is the 8890 and 2 is the 6890.  2 runs fine.   1 when you click on sequence it locks open lab for 1, 2 runs fine and you can make a sequence even when 1 is locked.

Reply
  • I am using one software to control both instruments as instrument 1 & instrument 2 with 2 licenses.  1 is the 8890 and 2 is the 6890.  2 runs fine.   1 when you click on sequence it locks open lab for 1, 2 runs fine and you can make a sequence even when 1 is locked.

Children
Was this helpful?