8890 gas sampling valve diagrams - graphics and option numbers

Hi

I think you should contact your local agilent support.

Based on your requirement, design, option and valve diagram for a perfect analyzer can get.

Like how many valves, which type inlet, which type column, which type detector, backflush etc.

All those info, you can get from your local agilent support once you will tell your requirement of analysis...

Hi

I think you should contact your local agilent support.

Based on your requirement, design, option and valve diagram for a perfect analyzer can get.

Like how many valves, which type inlet, which type column, which type detector, backflush etc.

All those info, you can get from your local agilent support once you will tell your requirement of analysis...

The 8890 is delivered, with valves and everything. The problem is different mounting of tubing at the 1-port valve ports, compared with our older 7890 GC`s. Previously, all valve option details were available as graphics in the old 7890 manuals. We need to verify the new valve configuration at the 8890 GC from new 8890 manuals, to be sure that everything is correct and properly configured.

The local Agilent support office was not able to help us asap with the 8890 manuals needed.

Best regards -

Lars

Generally operational manual come along with new instrument in CD.

If you want, you can share valve diagram if there is any problem.

Mostly valves are same for 7890 and 8890..

Vici valves used..6 port / 10 port common..

Hi

https://community.agilent.com/technical/gc/w/wiki/10258/collection-of-7890-8860-and-8890-gc-resources

On above link, you can get all type of manuals...8890/ 8860/ 7890 but not 6890..

Hi,

I know the shown link to the documents very well. However, the full 8890 valve option list with diagrams/graphics was not found. If you have found the needed information in the available 8890 manuals, please let me know. 

Best regards -

Lars