Looking for a installation guide for a PTV Inlet for a 7890A GC

Hi

You can read advance operation manual of 7890 in below link which is collection of gc manuals.

https://community.agilent.com/technical/gc/w/wiki/10258/collection-of-7890-8860-and-8890-gc-resources

How to config, it's menrion there..

And As i know, once you will purchase this then some pages of installation/configuration will be along with this..

Generally, EPC need configuration, rest all pneumatic/heater sensor..

If doubt then you can contact to your local agilent support to do this job..

Hi jsharun!  Let me know if this is the manual you are looking for.  www.agilent.com/.../G3501-90010_051180.pdf

That did the trick. Someone packed the inlet into a bin and stuffed it on a shelf. We have a project coming up and I never used or setup one before.

Hi Kristen, 

Have you a installation guide for a PTV inlet for GC 8890 and how configurated heater parameters in service mode. 

Hi Nur5ik this user manual is not available on Agilent.com.  It would have been shipped with your 8890 GC PTV inlet accessory.  If you are unable to locate the user manual I'd recommend you contact your Agilent representative and they can assist you.  

Thanks