Noise and Drift test and Signal to Noise test for GC

We do not give OQ Specifications unless you have had OQ in the past. And if you did have OQ in the past, you have had the specifications.

If you had OQ before and lost the specifications, you would need to call your local support so that they can assist you in confirming you have had OQ and than they can potentially assist you in getting the specifications, that is of course if the rules in your region are as I mentioned above, they might not give OQ Specifications to anyone, even if you had OQ before. 

We had the initial OQ when we bought the GC a few years ago. Then we had a contractor perform the yearly qualifications. Now we are going to do the yearly qualifications in-house.

Thank you very much for your help,

The Agilent Equipment Qualification Plan (EQP) for OQ is freely available on the Agilent website for potential customers to review.

I have attached the standard EQP OQ for GC

Thank you very much for your help!