Could you tell me if a new GC instrument whose model is 6820 with 35900E interface can be added to an OpenLab CDS 2.3. If yes, indicate in what way. I appreciate your help.
Find maintenance, best practice, and troubleshooting articles.
Could you tell me if a new GC instrument whose model is 6820 with 35900E interface can be added to an OpenLab CDS 2.3. If yes, indicate in what way. I appreciate your help.
Hi mberru,
The 35900E is supported, but I do not see a listing for the 6820. I would suggest contacting your local sales and support for any other possible solutions.
Regards
James
Hi James:
Could you tell me what version of the old Chemstation software was used to control the GC6820?
Thanks a lot.-
James:
Do you know if a GC driver is needed to be able to see the equipment in the software?
Thanks for you attention.-
Hi mberru,
The 6820 was not a GC that was available in my area so I have no experience other than being able to look it up some information. Hopefully someone else can jump in here with better information.
Regards
James
Hi Mberru,
6820A GC works with Cerity and Old Ezchrom Software. My knowledge, this GC is very low budget GC, it does not have software control for controlling, only data can be collected using Cerity and Ezchrom software. Communication between GC and software is using RS232 cable. As per Agilent, it has reached EGS on March 2017.
Thanks,
Nila