Hello,
We are using ECM 3.6 and typically connect GC/MS, GC-MS/MS and LC-MS/MS. We added a 7890B+PAL3 to our fleet of instruments and would like to use MassHunter (10.1 SR1) to connect to and collect data from this GC/FID. I see there is an article here about configuring a GC-only system with MassHunter, and indeed I've done this configuration previously outside of ECM. However, the GC Instrument Configurator requires an address for an MS. Should I be able to configure a GC-only system within MassHunter GC Acq using ECM, or is this action prevented? Is there another GC Acquisition software to use that will still allow the data that is collected to use Quantitative Analysis to process it?
Thanks,
John