I've been having problems with my HPLC-ICP-MS set-up! Everything seems to work normally, except when the run begins there is no chromatogram signal or counts for any of elements (internal standards and analytes) in the real-time display in Masshunter…

Hi All

Just a question about half mass measurement on 7900 ICP-MS using Masshunter 4.6.

Example:

If I select the half mass option (+0.5) for 78Se to measure mass 78.5, does the system acquire data on both mass 78 and 78.5?

I can't see visually data for…

Hello,

We have 2 ICP-MS instruments running MassHunter 4.3 (G7201C, Ver C.01.03, Build 505.6, Patch1) and I have a question about Action on Failure options.  There are four simple actions available to execute for out of range QC checks. These are;

1. Ignore…

Hi guys,

I have 7800 ICP-MS-Agilent with software "ICP-MS MassHunter 4.3 Workstation".

And I have problem, after every end analysis, software get error:

The type initializer for
'Agilent.MassSpectrometry.Icpms.DataAnalysis.GenerateReportDialog…

I have 3 ICP-MS installed in our cleanroom that I'm trying to get connected to a local network. Each instrument has it's own computer to access the Mass Hunter software. When I connect all 3 instrument and 3 computers to a switch hub, I get communication…

Hi everyone,

The 'Data Analysis' software, part of Masshunter 4.4 Workstation is not working anymore on the computer managing our ICPMS 7800. It simply doesn't start.
The Offline version is not working at all (whether you start it from a shortcut…

Dear  All,

I am having login issues in the control panel of the OLSS, I am using a ICPMS 7800,  while login to the control panel the error of change password is popping up now and then it's an inconsistent issue since some time I am able to login to the…

Can anyone provide me with the Specification of Agilent Mass hunter 4.5 Software for ICPMS.

We are using ICP-MS MassHunter 4.5 with OpenLAB ECM.  System parameters, audit trails, and other metadata are upload to ECM as .xml files. Very nice!  However, they are not easy to read. 

For example, the method (AcqMethod.xml) and audit trails (acqbatch.instcntl…

Hi Team,

We have an ICP-MS model 7900 operating with MassHunter software. While creating the batch, we have to choose Low / General / High matrix purpose.

I would like to know what is the difference between these methods and which parameters are varying…

In Mass Hunter my only option is to export a performance report and data as an excel file. The online courses state that there is a generate button which generates a pdf version of the performance report. Is there a way to set this up so I can generate…

Hello,

I am having problems when trying to use batch sizes above 200 samples in MassHunter for ICP-MS 4.5. I get a warning at method validation "Number of sample lines in the batch may exceed boundary of database capacity (200 sample lines)" The instrument…

Hello,

I am trying to assign a static IP address to a new 7900 ready for connection to our LAN. I am able to assign the new addresses to the instrument and PC. Using ping from command line shows that there is a connection between them. I have created…

Hi There,

We recently installed an 8900 QQQ ICP-MS with mass hunter software. I am trying to figure out the best way to run and and use tune parameters when using a Laser Ablation sample introduction system. I want to run start up parameters (torch axis…