Hi
I was asked to connect a Miramist nebulizer to a double pass spray chamber. I found that it is almost impossible to fit the gas tubing into the miramist gas connector. It says 4mm on the red fitting but it is extremely tight. . Has anyone had this problem and is there a workaround?
Regards
Zaheer
Hi Chelsea
Thank you for the reply. Below is the gas fitting that comes with the Miramist from Agilent. It IS a 4mm push-in gas fitting but the 4mm gas tube on the ICP does not fit in easily. Have you used one of these?
Regards
Zaheer
The Mira Mist should have come with two options for connecting the gas. That one you have pictured and a second option which comes with the gas line included. Do you still have the original packaging? The gas line and connector you need may have been misplaced. 
The Mira Mist should have come with two options for connecting the gas. That one you have pictured and a second option which comes with the gas line included. Do you still have the original packaging? The gas line and connector you need may have been misplaced.
