P/A icp ms 7700 steps for making P/A tuning ,, I didn't do it before and I need a help for preparing it and its steps on software masshunter 4.6 software and thnx for help

Question

cschulz · Answer

Hi, just make a solution of both stock solutions. The final solution should have at least 100ppb. 
 Then click in Masshunter on &bdquo;plasma&ldquo; and activate the P/A Tuning. Define the position in the Autosampler for the mixed solution and then everything should be fine. 
 
 best regards chris