if the sample solution after digestion is still a little milky, can we put it into ICP-MS for testing?

Hi Di Xu,

normally samples should not be turbid after digestion. Looking at your sample, i would guess that this is not a problem if you run it through our ICP-MS, but keep in mind that it probably is not homogeneous. 

Hi Di Xu,

normally samples should not be turbid after digestion. Looking at your sample, i would guess that this is not a problem if you run it through our ICP-MS, but keep in mind that it probably is not homogeneous. 

Hi Cschulz, 

thank you for answering my question. 

we put it into the ICP-MS to test, and the result looks fine. 

But we still need to optimize the digestion method to ensure it is clear and clean before measurement. 

Thank you

Best regards, 

Di Xu