Detection limit of ICP-MS 7900

Question

What is equation/method that the software uses to determine the detection limits?

emretoprak · Accepted Answer

You can check the help to read about the detection limit. Basically: 
 
 DL = 3 * standard deviation of BEC (BEC will be calculated from the calibration standards with 0 concentration). 
 Level 1 Conc: 0.0000 mg/L 
 Level 2 Conc: 0.0000 mg/L 
 Level 3 Conc: 0.0000 mg/L 
 Level 4 Conc: 0.0100 mg/L 
 Level 5 Conc: 0.1000 mg/L 
 In this example, BEC will be calculated from the first three levels. They all have zero concentration.

Detection limit of ICP-MS 7900

Top Replies