ICP-MS 7900 and i want to use high matrix introduction system (UHMI)uhmi

Hi, here I work with a ICP-MS 7900 and i want to use high matrix introduction system (UHMI), for samples with high salt concentrations, but i dont know if  a special configuration for de instrument and software is needed or every ICP-MS 7900 can do it?

Parents
  • Hi

    Since instrument setting for this application should be optimized from instrument software and one more dilution line should be connected with carrier then better to call your local agilent support to put this setup to your 7900 icpms.

Reply
  • Hi

    Since instrument setting for this application should be optimized from instrument software and one more dilution line should be connected with carrier then better to call your local agilent support to put this setup to your 7900 icpms.

Children
No Data
Was this helpful?