Printing Problem SpektrAA 5.3
Find maintenance, best practice, and troubleshooting articles.
Printing Problem SpektrAA 5.3
Hi
Check your default printer is set with spektrAA 5.3.
Print demo page.it's printing or not..
The printer in SpectrAA is set to the default printer, which we want to use for printing. Demo page ist printing. Selecting another printer doesnt print too.
Any error shows during print.
Remove default printer and again set as default printer.
shows no errors. Printer removed an new installed - no success
Look like this is windows problem.
Check printer cable
Put any other printer cable then see.
If any printer is installed properly and selected as default then it should print the pages..
Hello
I have seen this before- if certain report settings are selected but no data has been collected (for example, you haven't completed a calibration but have selected calibration graph report to be included in the report settings) the report will not print. In your case, if you are trying to print a blank method, you will need to deselect almost everything that would require collected data in order to report in the report settings, and only include method parameters, notes, ect.
Hope that makes sense