End Of Live (EOL) Adobe flash player for icpoes ICPExpert II and AAS SpectrAA 5.X version after 11 January 2021

Solution/Action for SpectrAA software version 5.x:

The required configuration can be done by changing a single item in an ini configuration file.
NOTE: Local administrative will be required to update the IndexPage.ini configuration file.

Reconfiguration does NOT require a service engineer visit to site.

    Steps required for configuration of IndexPage.ini file change are:

In the file C:\Program Files (x86)\Agilent\SP100\Run\Help\IndexPage.ini, Change the option FROM SWF=Yes TO SWF=No

SpectrAA can now be launched and run.

NOTE FOR NEW INSTALLATIONS OF AA Instruments:
    The installing service engineer will need to follow the above configuration requirement

Solution/Action for ICP-OES and ICP Expert II:

To continue using the ICP-OES and ICP Expert II use the top ribbon drop down menus. Loss of functionality of the Startup Screen will not impact analytical results.

There is a how-to article about this as well:  How to Resolve SpectrAA Software Issues due to Adobe Flash Failure - Wiki - Atomic Spectroscopy - Agilent Community

Thank you so much.

Thank you so much.