• State Verified Answer
  • Replies 4 replies
  • Subscribers 64 subscribers
  • Views 824 views
  • Users 0 members are here
Related

Agilent Knowledge Portal

Find maintenance, best practice, and troubleshooting articles.

Agilent Knowledge Portal

agilent atomic absorption 280Z AA

bala

hi i have problem in agilent atomic absorption machine , absoption rseult value showing on -(negative) lamp  is new one graphite also new one, arsenic result only showing in negative values , what was the problem anyone guite me how to solve this series

thak you, 

Parents
  • 0

    Hi there,

    You might want to start buy optimizing the signal for the lamp through the furnace before doing anything else to ensure that you are getting light transmitted through the furnace. There are instructions in the help how to do this.

    Once you have done this, use one of the cookbook methods and try a standard just to see if things are working

     

    Kevin

Reply
  • 0

    Hi there,

    You might want to start buy optimizing the signal for the lamp through the furnace before doing anything else to ensure that you are getting light transmitted through the furnace. There are instructions in the help how to do this.

    Once you have done this, use one of the cookbook methods and try a standard just to see if things are working

     

    Kevin

Children
No Data
Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help