This information applies to: Agilent LC and LC/MS instruments which use PEEK tubing.
Issue
Clean, straight edge cuts of PEEK tubing are essential to avoid chromatography and void volume issues.
Items required
Steps to Follow
Warning: Wear appropriate PPE to protect yourself from any potential chemical exposure as described in the material handling and safety data sheet supplied by the chemical vendor, and always follow good laboratory practice.
Cutting blades are sharp so be careful to avoid injury during cutting. |
Figure 2. Tubing in position to cut
Tip: The blade has one straight edge and one diagonal edge. Use the straight edge to achieve a smooth straight cut on the tubing.
|
Learn how to effectively maintain your Agilent HPLC and LC/MS systems:
HPLC Learning Paths LC/MS Learning Paths e-learning paths available from Agilent education |