How to Import Default Templates in OpenLab CDS 2.x

This Information Applies To: Agilent OpenLab CDS 2.x

Issue

This article provides the instruction on how to import default report templates.

Background

Agilent ships a set of default report templates with OpenLab CDS. Follow this procedure to make the default templates available in your project.

Prerequisites

To be able to carry out the procedure as described, you need the following privileges: Project Management > Edit content of project, and Report Template > Create report template. Privileges are configured in the Control Panel.

Steps to Follow

1. Select the Data Selection view.
2. In the Import/Export ribbon tab, click Import Default Templates. (Figure 1)
   
   Figure 1: Import Default Templates 
   
3. In the Select templates to import dialog box, select the required formats. By default, both A4 and Letter are selected. Select the size that is used in your region. (Figure 2)
   
   After the import, a success message is shown. (Figure 3)
   
   
   Figure 2: Selecting templates A4 and Letter size to Import
   
   
   Figure 3: Import report templates complete 
   
   

In the navigation pane under Methods & Templates, select Report templates. Press [F5] in the PC keyboard to refresh the display. (Figure 4)

Figure 4: Report templates under Methods & Templates

Note: If you repeat this procedure and import the default templates again, they will be copied into a subfolder of the Report templates folder. The subfolder is named corresponding to your OpenLab CDS version. If no subfolder can be created (for example, in an ECM 3.x system on folder level), the filenames are extended by the version number, preventing the existing set of templates from being overwritten.

Learn how to effectively operate your Agilent OpenLab Chromatography Data System: SW-OLII-2160e - Introduction to OpenLab CDS Reporting (Version 2.5) e-learning course available from Agilent Education