• Created : 
  • Modified : 
  • Category :  Agilent Knowledge Portal
  • Entry Type :  Article
  • Product Type :  Automated Electrophoresis Systems Real-Time PCR (qPCR)
  • Component :  Bioanalyzer Systems Femto Pulse Systems Fragment Analyzer Systems Oligo Pro II Systems TapeStation Systems ZAG DNA Analyzer Systems qPCR Systems
  • Product Name :  2100 Bioanalyzer Instrument 4150 TapeStation System 4200 TapeStation System 5200 Fragment Analyzer System 5300 Fragment Analyzer System 5400 Fragment Analyzer System AriaMx Real-time PCR System
  • Task :  Best Practices
Related Articles

  • Parallel Capillary Electrophoresis Instrument Side Compartment Bottles

    This Information Applies To: Agilent 5200/5300/5400 Fragment Analyzer, Femto Pulse, and ProteoAnalyzer systems Issue If the bottles in the Fragment Analyzer, Femto Pulse, or ProteoAnalyzer side compartment are damaged or lost, they would need to be replaced. Background An example of the bottles within the side compartment is shown in Figure 1 . Figure 1 . 5200 Fragment Analyzer side compartment Resolution Gel and Conditioning Solution bottles for 96 or 48 capillary instruments...

  • Running the System Verification on Agilent TapeStation Systems

    This Information Applies To: Agilent 4200 TapeStation 4150 TapeStation, TapeStation controller software Issue The system verification can be run to check the TapeStation performance, for example, when you suspect an instrument hardware fault. Items Required 4200 TapeStation TapeStation Test Tape (p/n 5067-5601 ) Full rack of Loading Tips (p/n 5067-5598 ) TapeStation Tip Waste Bucket (p/n G2992-40046 ) Empty 96-well plate (p/n 5042-8502 ) One regular ScreenTape device 4150...

  • Reassigning the Upper or Lower Marker in the TapeStation Analysis Software

    This information applies to: Agilent 4200, 4150 and 2200 TapeStation systems Issue Resetting the upper or lower markers from the automatically assigned peak in the Agilent TapeStation analysis software. The TapeStation analysis software will assign the markers automatically. The software is able to assign the markers as they each have a known size (bp/nt) and therefore should migrate a known distance through the gel. Occasionally the software might misassign a marker peak. Incorrect marker...

Disposing of your Automated Electrophoresis or AriaMx Instrument

Answer

This information applies to: Agilent automated electrophoresis and AriaMx real-time PCR systems

Issue

If you are looking to recycle your old Agilent product, Agilent provides customers with environmentally responsible solutions for the disposal and recycling of electronic equipment.

Steps to follow

  1. Identify your instrument: Determine the make, model, and serial number of the Agilent instrument that you would like to recycle.
  2. Visit the Agilent Take-back Instructions page and select your country.
    Note: The take-back option is not available in all countries
  3. For most countries, a form is provided for you to fill out.
  4. For some countries, no form is provided for your country but further information is provided on the website.

 

For Research Use Only. Not for use in diagnostic procedures.

PR7001-3453

Was this helpful?
Privacy Statement
Terms of Use
Contact Us
Site Help