Recommended Shut Down Procedure for Agilent TOF/QTOF

Document created by m4esti Employee on Mar 18, 2020
Version 1Show Document
  • View in full screen mode

In response to the COVID-19 crisis many customers are contacting Agilent for recommendations in shut down procedures.

 

  1. If you have an uninterrupted drying gas source (N2 generator) we recommend the you put the system into Standby.
  2.  If you have an interrupted drying gas source (dewars) we recommend venting the system following the procedures attached. Emphasis should be placed on the importance of waiting for the vent to complete (turbos spin down), and running the Smartcard shutdown script before powering off at the front button.
3 people found this helpful

Outcomes