Minimum parts needed to add MSD to 6890/7890 (GC Interface parts)

Document created by agilent Employee on May 19, 2016Last modified by agilent Employee on May 19, 2016
Version 2Show Document
  • View in full screen mode

To add an MSd transfer line to your 6890 you will need to order.....

Valve Driver Bracket                               G1580-00070    qty   1

Capture screws M4x12mm, Torx T20    1390-1023      qty   2

Valve Driver wiring harness                    G1530-60660    qty   1

MSD cable, heated zone                         G1530-60790    qty   1