Post Sequence Shutdown Macros (OpenLAB CD Chemstation, Classic Chemstation)

Version 1

    In the Sequence Parameters screen you can define sequence end actions. The actions are stored with the sequence template. When you use a sequence end action, it performs this action after the last injection of the sequence is finished.

     

    If you are shutting down the pumps, and are using a buffer solution, you may want to rinse the system before stopping flow. In that scenario, you would want the last line of your sequence to use a rinse method to remove the buffer from the system. This will prevent salting out of the buffer and possibly causing clogs.

     

    Below you will find step by step instructions with screen captures from both the classic Chemstation and the new Chemstation....