How to add a new system in Lab Advisor

Document created by sscheirs Employee on Sep 14, 2020Last modified by carlos_vargas on Nov 25, 2020
Version 14Show Document
  • View in full screen mode

Agilent Support Insights

 

This Information Applies To: Agilent Lab Advisor

 

Issue:

Lab Advisor Software provides state-of-the-art tests, tools, and calibrations to support you in the daily operation, maintenance, and basic troubleshooting tasks. 

This article describes how to add a new Agilent LC system within Lab Advisor. 

 

 

Steps to follow:

  1. Open Lab Advisor and click “Add System”. 
  2. Give a name to your instrument. (Don't use special characters, only numbers and letters)
  3. Enter the instrument address. i.e. COM1 for RS-232 or the IP address/localhost for LAN. The default IP address for Agilent's modules is 192.168.254.11, if another IP address is used, check the installation report or check with your IT department if any changes have been made.
  4. Press "OK". Lab Advisor will now connect to your instrument. 

 

Add System to Lab Advisor -  Agilent

 

Learn more on how to operate your Agilent Lab Advisor Software: Agilent Lab Advisor User Manual

 

Keywords: LC, Lab Advisor, System, Instrument, Configure System, Create, *** LC, add instrument, configure System

 

2 people found this helpful

Attachments

    Outcomes