• How to add a GC instrument in OpenLab CDS 2.X

    Agilent Support Engineer Insights   This Information Applies To: OpenLab CDS 2.X   Issue: The following procedure shows how to add a GC instrument in OpenLab CDS 2.X. Steps to Follow: 1. Open...
    lily
    last modified by lily
  • How to integrate merged peaks in OpenLab CDS

    Agilent Support Engineer Insights   This Information Applies To: OpenLab CDS 2.X   Issue: How to integrate non-ideally separated peaks starting above the zero baseline in OpenLab CDS?   Resolution:...
    carlos_vargas
    last modified by carlos_vargas
  • Migrating from OpenLAB CDS EZChrom Edition to OpenLab CDS Version 2.3 – Workstation to Workstation

    Migration is the process of moving your OpenLAB CDS EZChrom Edition methods and data to the new OpenLAB CDS version 2.3 environment. For OpenLAB CDS version 2.1 and higher, there are two versions of the workstation av...
    ryoboyle
    last modified by ryoboyle
  • Collection of OpenLab CDS ChemStation Resources

    Here is a "best of" collection of links to manuals and tools for OpenLab CDS ChemStation on Agilent.com, for OpenLab CDS seeCollection of OpenLab CDS Resources.  For instruments refer toCollection of Su...
    rolanddiaz-bone
    last modified by rolanddiaz-bone
  • Operating MassHunter and OpenLab in the same computer (NOT A RECOMMENDED USE)

    This is not a supported configuration by Agilent Technologies.    You are able to use Masshunter for both LCMS,  LC and CE only.  LC/CE only starting with Masshunter version 7.   Note: Alth...
    yamame
    created by yamame
  • Printing out your MassHunter Acquisition method

    Keeping a hard copy of your analysis method is very important.  Here I would like to share how to print out your MassHunter Acquisition method (Acquisition method: your analysis method).   1. Open MassHunt...
    yamame
    created by yamame
  • Recovering your .m MassHunter Acquisition analysis method from .d data file

    Losing your analytical method is devastating and the worst thing you want it to happen.   In my case, we had a major computer crash and I lost all the Acquisition analysis methods.    "Why didn't you ...
    yamame
    created by yamame
  • Fail to load method on MassHunter Acquisition B 06.01

    I got a rare error after re-installing MassHunter Acquisition B 06.01.     This error made all my Acquisition analysis methods unable to read.    Note: The reason why I re-installed MassHunter ...
    yamame
    created by yamame
  • How to configure Agilent GC headspace system within Waters Empower and ICF

    Introduction: This document describes the configuration of Agilent Gas Chromatography (GC) and GC/Headspace Sampler (HS) modules within Waters Empower and Agilent Instrument Control Framework (ICF).  The Ag...
    miriamc
    last modified by miriamc
  • Agilent Webinars Digest

    To be alerted via email of upcoming Agilent webinars and receive links to recordings, make sure to subscribe to the Webinar Notifications area in the Agilent Community.
    agilent
    created by agilent
  • Collection of OpenLab CDS, OpenLab Chemstation, MassHunter, and Reporting Videos

    Here is a compilation of video resources for Agilent OpenLab CDS, OpenLab Chemstation, MassHunter, and Intelligent Report, found in the section Software Videos in the Community and at Agilent Technologi...
    jlemes
    last modified by rolanddiaz-bone
  • Collection of OpenLab CDS Resources

    Here is a "best of" collection of links to manuals and tools for OpenLab CDS on Agilent.com, for Chemstation edition, see Collection of OpenLab CDS ChemStation Resources. For other software and instruments, refer to C...
    rolanddiaz-bone
    last modified by rolanddiaz-bone
  • Collection of OpenLab CDS EZChrom Resources

    Here is a "best of" collection of links to manuals and literature for OpenLab CDS EZChrom Edtion on Agilent.com,  for OpenLab CDS seeCollection of OpenLab CDS Resources, for Chemstation edition see ...
    rolanddiaz-bone
    last modified by rolanddiaz-bone
  • Collection of MassHunter Productivity App Resources

    MassHunter Productivity App Resources       User Topics Common Questions about the MassHunter Productivity App Streamlining Sequence Setup in the MassHunter Productivity App Considerations when Addi...
    mnevill
    last modified by rolanddiaz-bone
  • Video Series: OpenLab CDS for ChemStation Users

    It is my pleasure to present a new video series that helps to point out some of the differences you will experience with using OpenLab CDS version 2.4 if you are used to using OpenLab CDS ChemStation Edition products....
    jmiller924
    last modified by jmiller924
  • Tuning Retention Times in the MassHunter Productivity App

    For methods with retention times (RTs), the MassHunter Productivity App allows a user to automatically update a method's RT values based on analyzed data. This behavior is especially crucial for the Productivity App b...
    tannerstevenson
    last modified by luminous
  • Create a Custom Report Method for the MassHunter Productivity App

    The MassHunter Productivity App allows an admin to add any report method that can traditionally be used with MH Quantitative Analysis, and adds support for customization with the filtering, tagging, and user defined f...
    tannerstevenson
    last modified by dansmith
  • Streamlining Sequence Setup in the MassHunter Productivity App

    The MassHunter Productivity App incorporates several common-sense features that greatly reduce the monotony of creating a sequence:   1. Sequence Templates Sequence templates are the best way to improve sequence ...
    tannerstevenson
    last modified by tannerstevenson
  • Considerations when Adding Custom Methods to the MassHunter Productivity App

    The MassHunter Productivity App allows a lab manager to add their own methods in addition to the default method. This document will outline some considerations to make when adding custom methods.   1. Method Alig...
    tannerstevenson
    last modified by tannerstevenson
  • Result Error Statuses in the MassHunter Productivity App

    The results displayed in the MassHunter Productivity App are assigned one of the following error statuses: Error, Warning, or Valid. The App determines these designations based on three variables: the sample type, the...
    tannerstevenson
    last modified by tannerstevenson