• G4204-60090

    Hi community! Help me please, this G4204-81090 Low pressure mixer assembly for Agilent 1290 Infinity Quaternary Pump is a replacement G4204-60090?    I enclosing photo of the requi...
    last modified by a.fedulova
  • G1600 CE

    What does the error external pressure is >15bar indicates, when I don't have any external devices attached on the G1600 capillary electrophoresis
    last modified by teawilliams
  • The Agilent 7100 Capillary Electrophoresis system

    We want to check purity of oligonucleotide by technique of capillary electrophoresis on Agilent 7100 Capillary Electrophoresis System . Do we need special cassettes with capillaries? What kind? What diameter can capil...
    last modified by filippovich
  • 7100 Capillary Electrophoresis

    Here at UC Davis we use CE to determine caffeine content of beverages, anyone else using CE around here?
    created by labgod4
  • CE 7100 Lamp Change

    How do you change the lamp on the CE aside from just installing a new one so that your lamp is recognized by the instrument. Thanks
    last modified by slk
  • G7100-90000_CE_System_User_ebook.pdf

    The G7100 CE manual is attached
    last modified by jhagel
  • CE Level Sensor

    7100 CE continues to give Level Sensor Not Clean(EE 15976-49) after cleanig the sensor and flushing . Please advise what this could  be. Thanks
    last modified by teawilliams
  • Making an outlet injections for short retention apps on the G1600 and G7100

    Technical Note 5990-349EN, Use of extremely short effective length capillaries in CE – injection of sample from the outlet end of the capillary, explains the procedure for injecting from the outlet end of the ca...
    last modified by agilent
  • Distance to window on CE capillary

    For a G1600 and 7100 CE capillaries: The distance from the end of the capillary to the center of the window is 85mm.     40856 2011-0912
    last modified by agilent
  • Configuring a Dual Capillary Electrophoresis System

    The attached pdf contains instructions on changing the GPIB address of a capillary electrophoresis sytem from the default addresses of 19/17 to 29/28. Instructions include 82335 GPIB, 82341 GPIB and USB-GPIB interfac...
    last modified by agilent