Choose an area for discussions and documents
Hello, We are planning to move our Open Lab 2.1 to 2.3 Im not sure if there is a documentation which compare 2.1 to 2.3. So I need the Step from 2.1 to 2.2 too. So I would be happy to have them both. Important question. Can we migrate the data, we already created ? Can we use the same Reports ( rdl files ) ? Can the service… Show more
Hello, We want to create a specific Report which only show the Sample Name and the Concentration. Is it possible to put the Value between a self chosen token ? ( like between a $ or § ) In the RTE I only put 1 Data Field. The Expression I used is: In the processing method I selected as output destination. Windows File System.… Show more
Hello! Have anyone experienced a problem where one or more modules appear as missing in the instrument configuration? The problem can be corrected by itself or can be corrected by cycle power on the modules. The error is registered as "module gone during analysis". Also identify the module as "lost".
In one case the module indicator light was blinking. When we power cycle the unit the communication was re-established. In other cases the light was yellow as "not ready". We check CAN Cables and are ok. We are controlling the units by Empower 3. It is was suggested that can be a problem with LAN/CAN Repeater that was locked up buy, How I can…
Hi I have sever problem in switching from reverse phase mobile phase to normal phase. Can anyone help me out by providing validated reverse phase method for the determination of deltamethrin (pesticide) best regards
With Open Lab CDS chemstation C01.09, how can I save the data on both local and network drive? Thanks!
Hello, I marked this post as a questions and added tags to increase visibility. You are correct that you can setup a network drive in your ChemStation preferences and have the software save directly to the network drive as opposed to the local drive. While ChemStation allows you to do this, this workflow is most certainly not supported by…
- ryoboyle likes hexatriene's reply Re: Custom CalibrateTOFMassAxis scripts
- hexatriene likes 6545_walkup's reply Re: Custom CalibrateTOFMassAxis scripts
- jivetestem and jive-admin like celiarp2's reply Re: Post Your GC Selfie!
- james_jenkins likes m4esti's reply Re: Air leak 5973
- dlalbuerne likes rolanddiaz-bone's document Collection of Compliance Resources
Load more items
Hello everyone, I am using 7820A GC. Currently I have EZChrom Elite software running on a PC with Win XP (old university systems ), Now I want to upgrade to a newer version. I have another PC running Windows 8. Could you suggest me a newer version of Agilent GC software which work with 7820A? Do I need to pay if I upgrade the software? Kind… Show more
Hello, I just marked this post as a question. Unfortunately, support for the last revision of EZChrom Elite software (rev 3.3.2 SP2) only went up to Windows 7 32-bit. If your new PC is running Windows 8 then you will need to upgrade your software to a software that is compatible with that OS. There are three main software platforms…